Skip to main content
ExLibris
  • Subscribe by RSS
  • ExLibris Dev

    Correction to the z39.50_server" document - Element Sets

     

    • Product: Aleph
    • Product Version: 20, 21, 22, 23
    • Relevant for Installation Type: Dedicated-Direct, Direct, Local, Total Care

     

    Description:
    Correction to the z39.50_server" document, 
    Chapter 2.3.3. Element Sets

     

    Resolution:
    2.3.3.    Element Sets

    z39_server supports two special element sets, “F” and “X”.

    When the F element set is requested: 
    if the F element set is defined in ./alephe/tab/z39_server/z39_server_elements, the record is returned according to the lines defined in the table.
    if the F element set is not defined in the z39_server_elements table, a full record is returned.

    When the X element set is requested, a full record including Aleph alphanumeric fields (such as CAT, SYS, and so on) is returned. The X element set is recognized for USMARC format only. For all other formats, it is ignored.

    You can define additional element sets using the z39_server_elements configuration file.

    MARC records returned by z39_server always contain the 005 tag even if tag 005 is not defined in the element set configuration (in ./alephe/tab/z39_server/
    z39_server_elements).

    note:
    That is F is default set in the following sense: F is always recognized, also if it’s not defined by z39_server_elements.

     

     


    • Article last edited: 17-Jun-2016
    //doorbell.io feedback widged