Skip to main content
ExLibris
  • Subscribe by RSS
  • ExLibris Dev

    After Installing BIAF Label In Windows 7 Barcodes Do Not Print

    • Article Type: General
    • Product: Aleph
    • Product Version: 20

    Problem Symptoms:
    In Windows 7, when selecting the Add Barcode toggle in BIAF Label, a barcode is not generated.

    Cause:
    BIAF Label was not installed with Windows 7 Compatibility Mode set to WIN XP.

    Resolution:
    1. Uninstall BIAF Label
    2. Verify that the installation file BIAFLABEL.EXE is present in C:\AL500
    3. Before running BIAF Label, right click on the BIAFLABEL.EXE and navigate to the Compatibility tab
    4. Select the check box entitled "Run this Program In Compatibility Mode For:"
    5. Select Windows XP
    6. When prompted, define your current Service Pack
    7. Run C:\AL500\ALEPH 20.1\BIAFLABEL\BIAFLABEL.EXE
    8. After BIAF LABEL is installed, navigate to C:\AL500\ALEPH 20.1\BIAFLABEL\ and set Compatibility Mode to Windows XP for all remaining files with a .EXE file extension
    9. Prior to running BIAF Label, open any GUI module to build the BiafLabel.dat as a zero byte file in C:\AL500\Alephcom\bin

    Additional Information

    For further questions or inquires about BIAF Label, Windows XP and Windows 7 64 Bit, please contact IDNext Technical Support at support@idnext.co.il.

    Category: Printing (500)


    • Article last edited: 10/8/2013
    //doorbell.io feedback widged